The Inverter Plus Heat Pump is designed for both heating and cooling pool water as needed to maintain a constant
water temperature in pools or spas.
Recommended for indoor and outdoor pools, for pool volumes ranging between 15 m³ and 100 m³.
Wi-Fi connectivity is standard, allowing remote temperature adjustment for your pool.
1. Smart mode - regulates the heating capacity from 20 to 100%
2. Silence mode - regulates heating capacity between 20% and 80%, ensuring energy-efficient and quiet
operation. During this mode, the COP value can reach up to 11, making it 50% more efficient than its competitors.
Recommended for operation above -7°C.
During the first 5 days, the Inverter Plus pool heat pump operates at 100% output to heat the pool to the set
temperature. For the next 175 days, it operates at 50% capacity with an average COP of 11.5 to maintain the desired
pool temperature.
This results in twice the efficiency compared to On/Off heat pumps. Based on a 180-day season with
air temperature of 26°C, water temperature of 26°C, and humidity of 80%.
When operating at 50% capacity to maintain constant water temperature, the Inverter Plus heat pump produces an average noise level 10 times lower than conventional heat pumps with on/off switching. This ensures quiet operation and keeps neighbors satisfied.
Upon startup, the Inverter Plus heat pump's power consumption starts from 0A and gradually rises to the required level within 2 minutes. This gentle start-up process does not strain the energy supply/system of your home. In contrast, on/off heat pumps require five times the intake level of current upon startup, placing a heavy load on the home's energy system.
R32 refrigerant is a specially purified fluoride. It is an environmentally friendly gas with zero ozone depletion and a much lower GWP than older refrigerants.