Skimmer for liner pools, ideal for filtering the water surface and removing debris.
Made of high quality AISI 316L stainless steel, these three-depth skimmers are available in sizes S, M, and L, with a 2" connection, for installation in liner pools.
The lid allows the connection of a hand-held vacuum cleaner with a gasket and a high-gloss protective front plate. Adjustable lid height between 30 mm and 120 mm.
The pre-filter basket and the rosettes for the vacuum cleaner are made of AISI 316 stainless steel.
The task of skimmers is to remove floating debris (e.g. leaves, insects, etc.) from pools. The skimmer basket collects this detritus, therefore, it should be checked weekly. For optimum performance, set the pool water level to the centre of the skimmer opening.
Slow-dissolving chemicals, such as chlorine or flocculant tablets can be put into the skimmer basket, rendering the use of a separate floating chemical dispenser unnecessary. Most skimmer designs enable the vacuum-cleaning of the pool as well.
Stainless steel (also known as inox) is a steel alloy with a higher chromium content, more resistant to corrosion and staining, but contrary to its name, it is susceptible to corrosion, especially under low-oxygen, high salinity or non-ventilated conditions. The chromium oxide forms a passive layer that inhibits/decreases the further corrosion of the surface, and prevents rust from penetrating into the inner layers of the steel.