Inverter Plus Heat Pump

Designed to heat and, if needed, cool pool water to maintain a constant temperature in the pool or spa. Recommended for both indoor and outdoor pools, with a pool volume range of 15 m³ to 100 m³. Wi-Fi is included as standard, allowing you to adjust your pool’s temperature remotely.

Two adjustable operating modes:

• 1. Smart mode, which regulates heating capacity between 20% and 100%
• 2. In Silence mode, the heat pump regulates heating capacity between 20% and 80% for energy-efficient and quiet operation. Meanwhile, the COP value can reach up to 11, making it 50% more efficient than its competitors. Recommended for operation above 7°C.

Features:

• Operating range: ambient temperature 7°C – 43°C
• Silver-containing welds
• Hot gas fusion with the Saginomiya 4-way valve
• DC Inverter Compressor
• 50% longer titanium coil, 50% more efficient operation
• Powder-coated metal housing
• Inverter Plus heat pumps shipped with a protective cover

Warranty:

• Standard warranty: 3 years
• Heat exchanger warranty: 10 years
• Compressor warranty: 10 years

Lower energy consumption

For the first 5 days, an Inverter Plus pool heat pump operates at 100% capacity and heats the pool to the set temperature. For the next 175 days, it operates at an AVERAGE of 50% capacity with an AVERAGE COP of 11.5 to maintain the desired pool temperature. Thus, the AVERAGE COP is twice that of an On/Off heat pump. Based on a 180-day season with air temperature 26 °C / Water 26 °C / Humidity 80%

Exceptionally quiet

When the Inverter Plus heat pump operates at 50% capacity while maintaining the water temperature, the average noise level is 10 times lower than that of a conventional on/off heat pump. This ensures quiet operation and satisfied neighbors.

Soft Start

When an Inverter Plus heat pump turns on, the current draw starts at 0A and rises to the required level within 2 minutes. This does not affect your home’s power supply or electrical system. This is not the case with on-off heat pumps, as the current required at startup is five times the normal level, placing a heavy load on the home’s electrical system.

Environmentally friendly R32 gas

R32 refrigerant is a specially purified fluorocarbon. It is an environmentally friendly gas with zero ozone-depleting potential, and its GWP value is much lower than that of older refrigerants.